Accessories; Cables; Power Supply - Agilent Technologies 5517B User Manual

A c c e s s o r i e s
The following accessories are required to operate the laser head, but are
not included with it since different systems require different
configurations.
C a b l e s
Each of these laser heads requires a cable to connect it to the
measurement system electronics and power supply.
Table 4
heads in this manual. The table lists the connectors on each cable and the
axis boards and systems compatible with the cables. A detailed description
of each cable can be found in
P o w e r S u p p l y
The Agilent 10884B power supply is an external ±15 Volt supply used to
power the laser heads and Agilent 10780C/F, or Agilent E1708A, or
Agilent E1709A receivers. The 10884B plugs into ac line power.
Alternatively, you can design your own power supply. See
page 21 for power supply requirements.
Agilent 5517B/BL/C/D/DL/FL User's Guide
lists the laser head cables that can be used with any of the laser
Chapter 3, "Installation," of this manual.
1
General Information
Table 5 on
7