Lexmark CX827 User Manual page 97

Understanding the printer menus
Menu item
Sides
1 sided to 1 sided*
1 sided to 2 sided
2 sided to 1 sided
2 sided to 2 sided
Separator Sheets
None*
Between Copies
Between Jobs
Between Pages
Separator Sheet Source
Tray [x] (1*)
Multipurpose Feeder
Color
Off
On*
Auto
Pages per Side
Off*
2 Portrait pages
4 Portrait pages
2 Landscape pages
4 Landscape pages
Print Page Borders
Off*
On
Collate
Off [1,1,1,2,2,2]
On [1,2,1,2,1,2]*
Offset Pages
None*
Between Copies
Between Jobs
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Specify the scanning behavior based on the original document.
Specify whether to insert blank separator sheets when printing.
Specify the paper source for the separator sheet.
Set the printer to generate color output from a scan job.
Specify the number of page images to print on one side of a sheet of paper.
Place a border around each image when printing multiple pages on a single
page.
Print multiple copies in sequence.
Offset the output of each print job or each copy of a print job.
Notes:
•
Between Copies offsets each copy of a print job if Collate is set to On
[1,2,1,2,1,2]. If Collate is set to Off [1,1,1,2,2,2], then each set of printed pages
is offset, such as all page 1s and all page 2s.
•
Between Jobs sets the same offset position for the entire print job
regardless of the number of copies printed.
•
This menu item appears only when a multiposition staple, hole punch
finisher is installed.
97