Lexmark CX827 User Manual page 68

Understanding the printer menus
Menu item
Date and Time
Configure
Current Date and Time
Manually Set Date and Time
Date Format (MM‑DD‑YYYY*)
Time Format (24 hour clock*)
Time Zone (UTC‑5:00*)
Network Time Protocol
Enable NTP (On*)
NTP Server
Enable Authentication
Paper Sizes
U.S.*
Metric
Screen Brightness
20–100% (100*)
Flash Drive Access
Enabled*
Disabled
Allow Background Removal
Off
On*
Allow Custom Job scans
Off
On*
One Page Flatbed Scanning
Off*
On
Output Lighting
Off*
On
Audio Feedback
Button Feedback (On*)
Volume (5*)
Screen Timeout
5–300 seconds (60*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Configure the printer date and time and network time protocol.
Specify the unit of measurement for paper sizes.
Note: The country or region selected in the initial setup
wizard determines the initial paper size setting.
Adjust the brightness of the display.
Enable access to the flash drive.
Specify whether background removal is allowed.
Specify whether the Custom Job Scanning setting appears for
copy, scan, and fax.
Note: This menu item appears only when a hard disk is
installed.
Set the printer to scan any type of job involving the scanner
glass as a single page.
Note: The printer returns to the home screen after
performing a single flatbed scan instead of displaying
prompts.
Enable the integrated output light or indicator light of an
optional output bin.
•
Enable audio feedback for button presses, panel
interactions, paper loaded prompts, and error notifications.
•
Adjust the feedback volume.
Set the idle time before the display shows the home screen or
before the printer logs out a user account automatically.
68