Lexmark CX827 User Manual page 100

Understanding the printer menus
Menu item
Mirror Image
Off*
On
Negative Image
Off*
On
Shadow Detail
‑4 to 4 (0*)
Scan Edge to Edge
Off*
On
Sharpness
1–5 (3*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item
Allow Color Copies
Off
On*
Transparency Separators
Off
On*
Output Bin
Standard Bin*
Bin [x]
Allow Priority Copies
Off
On*
Custom Job Scanning
Off*
On
Allow Save as Shortcut
Off
On*
Adjust ADF Skew
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Create a mirror image of the original document.
Create a negative image of the original document.
Adjust the shadow detail in the original document.
Scan the original document from edge to edge.
Adjust the sharpness of the scanned image.
Description
Print copies in color.
Insert a blank sheet between transparencies.
Specify the output bin.
Interrupt a print job to make copies.
Set the printer to scan the first set of original documents using the specified
settings, and then scan the next set with the same or different settings.
Note: This menu item appears only when a hard disk is installed.
Save copy settings as a shortcut.
Set the printer to adjust the skewed images from documents that are scanned
from the ADF.
100