UNIT DESCRIPTION AND OPERATION The OSR300S is a passive infrared wall switch that turns lighting on and off based on occupancy and ambient light levels. SmartSet™ technology allows the sensor to be installed without any adjustments and automatically adjusts it to the usage patterns in the space.
Page 3
SmartSet™ Records typical occupancy patterns. Using this history Time Delays (which is constantly updated), it chooses an optimal time delay from two minutes (if the space is usually vacant) up to 30 minutes (if the space gets heavy usage). SmartSet behavior starts immediately, and is refined continually as history is collected.
COVERAGE PATTERNS The OSR300S will cover up to 300 sq. ft. (28m ). The typical recommended coverage for desktop activity is 150 sq. ft. (14m ). The sensor has a two-tiered, multi-cell viewing Fresnel lens with 180 degree field of view. (7.6m) (3.0m) Masking the lens...
INSTALLATION CAUTION WARNING TURN THE POWER OFF AT THE THE GROUND MUST BE TIGHTLY CIRCUIT BREAKER BEFORE SECURED OR THE SENSOR INSTALLING THE SENSOR OR WILL NOT WORK. WORKING ON THE LOAD. 1. Make sure that the power has been turned off at the circuit breaker. 2.
ADJUSTMENTS Sensor Adjustment The OSR300S is preset to SmartSet mode. It is designed for “Install and Forget” functionality. If you need to change the settings, follow the directions below. All major adjustments to the OSR300S must be made with the wall plate removed.