Matrix RXP Service Manual page 16

6.2 SERVICE MODE OVERVIEW - CONTINUED
Category Name
Automatic
Update
Automatic
Update
Time
Update
Check For
Updates
Update
From USB
MAC
Address
Network
IP Address
Setup
Wi-Fi
Setup
Facility ID
Serial
Number -
Console
Serial
Number -
Frame
Asset
Manage-
ment
Workout
Tracking
Asset Man-
agement
Show Cus-
tom Logo
Enable
Persistent
Logs
Experi-
mental
Enable
Data Col-
lection
14
CHAPTER 6: SERVICE MODE
Models Default
Check
ROWER
-
ROWER
Check For
Check For Updates/Install
ROWER
Updates
Update From
Update From USB/Install
ROWER
USB
Hardware
ROWER
Specified 255.255.255.255.255.255
Hardware
ROWER
Specified 255.255.255.255.255.255
-
ROWER
0
ROWER
C(for Console)
+ Prefix(Type)
+ Derivative
ROWER
Model(A-Z, AA,
etc.) +YYM-
MXXXXX
F (for Frame) +
Prefix (Type)+
Derivative
ROWER
Model (A-Z,
AA,etc.) +
YYMMXXXXX
Can be checked OR not
Checked
ROWER
Can be checked OR not
Checked
ROWER
Can be checked OR not
Checked
ROWER
ROWER
ROWER
Range Units
Check/No Check -
- -
-
-
Byte.Byte.
0.0.0.0.0.0 -
Byte. Byte.
Byte.Byte
Byte.Byte.
0.0.0.0.0.0 -
Byte. Byte.
Byte.Byte
- -
0-10000 -
- -
- -
-
checked
-
checked
-
checked
Comments
Check for and install updates on an
automatic schedule.
If automatic update box above is
checked, the console will look for an up-
date via RSCU at the time defined here.
Check DAPI server for updates. If up-
dates are found they will be listed under
Available Updates and the button will
display Install.
Check a connected USB drive for up-
dates. If updates are found they will be
listed under Available Updates and the
button will display Install.
Mac address is polled from the installed
hardware.
Mac address is polled from the installed
hardware.
Opens Wifi setup.
-
The software will only be able to provide
the 'C' and prefix based on the detected
console, the user must enter the rest.
This is then validated by DAPI.
The software will only be able to provide
the 'C' and prefix based on the detected
console, the user must enter the rest.
This is then validated by DAPI.
If checked, workout data is sent to Work-
out Tracking network.
If checked, workout data is sent to Asset
Management.
Might need to run a workout first/wait 5
minutes for logo to appear.
-If checked and a Custom Logo has
NOT been uploaded to Asset Manage-
ment for the Facility ID the console is set
at, the MATRIX logo will be displayed on
the welcome screen.
The settings on this page are used to
manage experimental features and
advanced logging. These settings can
frequently change and are used for
testing and debugging new features.
Enabling any of these options may affect
system stability and potentially expose
the user's personal information.