Belt Pulley Set Replacement - Matrix RXP Service Manual

CHAPTER 9: PARTS REPLACEMENT GUIDE

9.9 BELT PULLEY SET REPLACEMENT

1) Remove the Left/Right spiral spring as outlined in Section 9.5.
2) Remove the belt (Figure A). Note: This is a flexonic belt. Remove the flexonic belt by walking it off the side of the pulley.
3) Remove the grip (Figure B).
FIGURE B
FIGURE A
4) Remove the rope rubber (Figure C).
5) Remove the 6 screws holding Left/Right belt pulley set to the frame (Figure D).
FIGURE C
FIGURE D
38