Input 1-16; Input Format And Upcoverter Control - Datavideo SE-3000 Visual Quickstart Manual

3.7.1 Input 1-16

When the Input Menu is selected, buttons
for all 16 sources are shown
To adjust an input source, select the
appropriate source (1-16) by touching the
screen, or using the control knobs.
3.7.2 Input Format and Converter Control ( Only for inputs 9-16)
Input Format & Up Converter Control (Inputs
9-16)
Inputs 9 – 16 support SD inputs as well as
HD inputs. Each has an up-converter to
allow the SD input to be up converted to
HD format.
HD Input Mode:
This input is in HD Format– no format
conversion is needed
SD Full Height:
This input is in SD 4:3 format
The 4:3 SD Input will be positioned in the
centre of the screen with black bars on the
left & right sides
BACK TO TABLE OF CO NTENTS
SD Full Width:
This input is in SD 4:3 format
The 4:3 SD Input will be
positioned in the center of the
screen and will be sized so that it
occupies the full width of the
screen.
This also means that some video
will be lost at the top & bottom of
the screen.
SD Full Screen:
This input is in SD 16:9 format
The 16:9 SD Input will be
positioned & sized so that is
occupies the full width & height of
the screen.
If the SD Video is in 16:9
anamorphic format, then this is
the mode to use.
30