Outputs Menu; Output Source Selection - Datavideo SE-3000 Visual Quickstart Manual

3.7.6.2 ENABLE REMAP
The default setting for ENABLE REMAP is
off. This is when you should configure your
inputs. When you are ready to go live, you
can simply press the ENABLE REMAP option
and it will highlight and read as ON.
3.8 Output Menu
This menu has two functions:
1. Select outputs source for the
assignable SE-3000 Outputs (other
than AUX).
2. Select the Multiviewer Mode.
Please see "How to connect One or Two
Monitors with Multiview", "How to Connect
Four Monitors for Multiview Preview" for
more information.
BACK TO TABLE OF CO NTENTS
33