Table of Contents
Advertisement
3.9.1.3 Width Control
This sets the width of the Wipe Border.
The value is the width of the wipe edge as
a percentage of the screen width
I.e. 10% = 10% of the screen width
100% = 100% of the screen width
You can adjust this value using the control
knobs, or by touching the control and using
the numeric keypad.
You can also use the joystick Y-Axis.
3.9.1.4 Level Control
This shows/sets the current level of the
transition.
Its range is 0.000 to 1.0000
The best way to adjust the wipe level is
using the T-Bar; it will give you more precise
control.
BACK TO TABLE OF CO NTENTS
40
Advertisement
Table of Contents
