Aligning The Print Head Automatically Using The Product Control Panel - Epson SureColor P6570 Series User Manual

• Make sure no direct sunlight enters the printer, or the alignment pattern may not be read correctly.

Aligning the Print Head Automatically Using the Product Control Panel

Aligning the Print Head Manually Using the Product Control Panel
Parent topic:
Related concepts
Print Head Nozzle Check
Aligning the Print Head Automatically Using the Product Control Panel
You can automatically align the print head using the control panel on your product. Make sure no direct
sunlight enters the printer, or the alignment pattern may not be read correctly.
Note: You must manually align the print head when you are using any transparent or colored paper or on
these paper types: Plain paper, Epson Enhanced Matte Posterboard.
1. Load roll paper or cut sheet paper in the printer.
Note: Load paper that is at least 15.2 × 21.9 inches (388 × 558 mm) or larger.
2. Make sure the correct paper type is selected.
Note: If you are using commercially available paper, make sure you create the custom paper
settings in advance.
3. Select
product control panel.
4. Select one of the following:
• Auto (Standard): if printed ruled lines are misaligned or print results are grainy or otherwise
unsatisfactory (takes 9 to 35 minutes to complete)
• Auto (Details): if printed ruled lines are misaligned at the edge of the paper or standard automatic
alignment results are unsatisfactory (takes 9 to 35 minutes to complete)
The sensor reads the adjustment pattern and automatically aligns the print head.
Note: Do not open the front cover or turn off the printer during the alignment process.
5. After the alignment is complete, check the results.
Print Head Maintenance
> paper source > Paper Setting > Print Adjustments > Ruled Line Alignment from the
307