Patterns: Startup Sequence - Arris Touchstone TM3202G User Manual

Mode
No AC
Power
No Battery
Firmware
Upgrade

Patterns: Startup Sequence

The following tables show the Telephony Modem light patterns during each phase of the
startup sequence. There are two phases of startup; the telephony phase and the cable
modem phase. Both are outlined below.
Telephony Startup Sequence
Power, US/DS,
Online
Off
Flash
On
On
On
Release 32 STANDARD 1.2 August 2016
© 2015-2016 ARRIS Enterprises LLC. All Rights Reserved.
Power Ethernet
(LEDs on rear
panel connector)
Off Off
On (normal
operation)
Telephone 1
Off
Flash
Cable Modem Startup Sequence
See
Flash
Off
Flash
Chapter 7: Using the Telephony Modem
US/DS Online
Off Off
Flash On
Telephone 2 Battery
Off
Flash Flash
(page 34)
Off
Flash
Flash
Normal Operation
Touchstone TM3202G Telephony Modem User Guide
Tel 1 / Tel 2
Off
(normal
operation)
Description
Off No power to modem
Power-on Self Test
Off Retrieving telephone
network information
Off Retrieving telephone
line information
Off Activating telephone
service
Battery
Off
(normal
operation)
34