Indicator Lights: Startup Sequence - Arris Touchstone DTM602G Setup Manual

Getting
Safety
Started
Home Prev Next
Battery Modem
Installation Installation
Handset Ethernet
Installation Configuration

Indicator Lights: Startup Sequence

The following table shows the Telephony Modem light patterns during each phase
of the startup sequence. There are two phases of startup; the Telephony phase and
the cable modem phase. Both are outlined below.
Power,
Telephone
DS, US, Link
Online
1
Off Off Off
Flash Flash Flash
See "Cable Modem Start Up Sequence" Below
On On Flash
On On Off
On On Flash
Cable Modem Start Up Sequence
DS US Online
Flash Off
On Flash
On On Flash
Touchstone DTM602G Telephony Modem Setup Guide
About the
Usage
Handset
Battery
2
Off Off No power to Cable Modem
Flash Flash
Retrieving telephone network
Off Off
Retrieving telephone line
Flash Off
Flash Off Activating telephone service
Link
Off Off
Off Off Downstream found; upstream search
Downstream and Upstream found;
Off retrieving setup information from cable
Trouble-
Glossary
shooting
Description
Power-on Self Test
information
information
Description
Downstream search
operator
45