Mounting The Telephony Modem; Tools And Materials; Wall Mounting Instructions - Arris Touchstone TM3202G User Manual

Mounting the Telephony Modem

You can either mount the Telephony Modem on a wall or place it on a desktop. For wall-
mount applications, you can mount the Telephony Modem with the indicators facing upward
(vertical) or to the side (horizontal).

Tools and Materials

For wall-mounted installations, make sure you have the following tools and materials before
proceeding:
for mounting on drywall: Two 1/4" (6mm) drywall anchors (not included), two #6 x 1.5"

(38.1 mm) self-tapping panhead screws (not included), and a drill with 1/4" (6mm) bit (not
included)
for mounting on plywood or studs: two #6 x 1.5" (38.1 mm) self-tapping panhead wood

screws (not included)
screwdriver (flat-blade or Phillips, depending on what kind of screws you use)


Wall Mounting Instructions

Note: When mounting the Telephony Modem on drywall, try to position the Telephony
Modem so at least one of the screws is fastened to a stud. This may prevent the Telephony
Modem from pulling out of the wall in the future. To prevent overheating of the Telephony
Modem, do not block the ventilation holes on the sides of the unit.
1. Position the Telephony Modem on the surface where you intend to mount it. Orient the
Telephony Modem with the indicator lights facing up or right, as desired.
Release 32 STANDARD 1.2 August 2016
© 2015-2016 ARRIS Enterprises LLC. All Rights Reserved.
Chapter 5: Installing and Connecting your Telephony Modem
Touchstone TM3202G Telephony Modem User Guide
25