Pre-Operation Check - Honda F501 Owner's Manual

Place the tiller on a firm level surface and hold the tiller level (i.e. with
the rotary tines, front wheel (if equipped) and drag bar (see page
Stop the engine before starting service of the tiller. Servicing the tiller
on an unstable surface of the ground or without stopping the engine
can cause injury and/or equipment damage.
Daily inspection and service of tiller is essential for safe and reliable
operation. Perform the following check before operation.
1. Tiller outside
Aren't the fuel and engine oil leaking?
Isn't there any flammable material (dust, straw, etc.) around the
engine?
2. Control lever function
Does the lever operate smoothly?
3. Wiring and cables
Isn't the insulation of each wire and cable torn or cut?
Is there any wire or cable pinched by the neighboring parts?
4. Engine operation
Start the engine. Is there any abnormal sound from the engine? (See
pages 22 through
Does the engine stop securely by operating the engine switch? (See
pages 34 and
If you notice any other abnormal symptoms, consult with your
authorized Honda dealer promptly.
5. Bolts and nuts
Check for looseness in fastened parts. Securely tighten all loose
parts.
24 for starting procedure.)
35 for stopping procedure.)
4.

PRE-OPERATION CHECK

14 )).
13