Table of Contents
Advertisement
TREADMILL ASSEMBLY STEPS:
Step 19 Power Cord Installation:
CIRCUIT BREAKER: In the event
the current drawn by the treadmill
exceeds a specified value, the Circuit
Breaker portion of the power on/off
switch will operate. The rocker lever will
automatically release and position itself
to a position half way between on and off,
thus opening the power circuit.
If this should occur, please wait 10
minutes and then reset the Circuit
Breaker by rocking the power switch fully
to the OFF position (O), and then rocking
the power switch back to the ON position
(-). If it does not reset, or the Circuit
Breaker operates again udner normal use,
contact True Fitness at 1-800-883-8783.
CHAPTER 2: ASSEMBLY GUIDE
Circuit Breaker Positions
220V
Truefitness.com / 800.426.6570 / 636.272.7100
Note: The above picture shows the power
switch in the OFF position (O) for reference.
110V
31 of 171
Advertisement
Table of Contents
