Removing The Outdoor Fan - Hitachi FSXN Series Service Manual

10 Servicing

10.7 Removing the outdoor fan

D A N G E R
• Turn OFF all the power source switches.
N O T E
• For servicing use the following tools:
- Adjustable wrench.
- Spanner.
- Phillips screw driver.
1 Remove the air grille as described in the procedure
the air grille, see on page 297.
• Fan motor position.
A: DC fan motor.
2 Remove the closing nut -A- and the flat washer -B- that fix the
propeller fan -C- to the motor shaft using a box wrench. Remove
the propeller fan -C- from the motor shaft. If the fan is difficult to
remove as the fan is tightly fixed to the motor shaft, use a puller.
N O T E
Do not apply too much force to the shroud (plastic part) -D- to
avoid breaking or deforming it.
298
SMGB0065 rev. 1 - 12/2010
- Puller.
- Nipper.
- Box wrench.
Removing
A
A
B
C
D