Explanations Of Symbols On Inverter - Omnik Omniksol-2.5k-TL2-S User Manual

2.2 Explanations of Symbols on Inverter

Symbol
6
Dangerous electrical voltage
This device is directly connected to public grid, thus all work to the
inverter shall only be carried out by qualified personnel.
DANGER to life due to high electrical voltage!
There might be residual currents in inverter because of large
capacitors. Wait 10 MINUTES before you remove the front lid.
NOTICE, danger!
This device directly connected with electricity generators and public
grid.
Danger of hot surface
The components inside the inverter will release a log of heat during
operation, DO NOT touch aluminum housing during operating.
An error has occurred
Please go to Part 9 "Trouble Shooting" to remedy the error.
This device SHALL NOT be disposed of in residential waste
Please go to Part 8 "Recycling and Disposal" for proper treatments.
Without Transformer
This inverter does not use transformer for the isolation function.
Standards Association of Australian
The inverter complies with the requirement of the AS4777.
CE Mark
Equipment with the CE mark fulfils the basic requirements of the
Guideline Governing Low-Voltage and Electromagnetic Compatibility.
No unauthorized perforations or modifications
Any unauthorized perforations or modifications are strictly forbidden, if
any defect or damage (device/person) is occurred, Omnik shall not
take any responsibility for it.
Description