Electrical Connection; Safety; Ac Side Connection - Omnik Omniksol-2.5k-TL2-S User Manual

6.

Electrical Connection

6.1 Safety

6.2 AC Side Connection

1. Integrated RCD and RCM
The Omniksol inverter is equipped with integrated RCD (Residual Current Protective
Device) and RCM (Residual Current Operated Monitor). The current sensor will detect
the volume of the leakage current and compare it with the pre-set value, if the leakage
current exceeds the permitted range, the RCD will disconnect the inverter from the AC
load.
DANGER
DANGER to life due to potential fire or electricity shock.
With the inverter powered, comply with all prevailing national
regulations on accidents prevention.
This inverter will be directly connected with HIGH VOLTAGE
power generation device; the installation must be performed
by qualified personnel only in compliance with national and
local standards and regulations.
NOTICE
Electrical connections shall be carried out in
accordance with the applicable regulations, such as
conductor sections, fuses, PE connection.
DANGER
DANGER to life due to potential fire or electricity shock.
NEVER connect or disconnect the connectors under load.
23