Advertisement
Instructions for kit #B 1925
□
19 A. Glue and tape together the Front Roof and the Rear
Roof set - the Front Roof overlaps the Rear Roof.
Note: Wallpapering in the Attic is tight. Pre-cut your wallpaper
now or make a template for cutting the paper later.
B. Set the Divider within the 1st floor. Put the Attic Dividers in
place, making sure they are pressed all the way forward. Glue
and tape the Roofs to the housebody, centered side-to-side (2").
C. Glue,tape, and weight the Porch Roof to the housebody, the
Front Roof, the Porch Triangles, and the Porch Beam Cap.
The Roofs overhang 2"
Front Roof
Porch Roof
Inspect from inside to make sure everything is tight.
Stretch Tape
underneath
Attic Dividers
Line up with the edge
Porch Roof
Tape and weight
Let the glue dry - take off the tape.
Roof Assembly
Rear Roof Set
Front Roof
Tape
The Porch Roof's beveled edge faces up
Front Roof
Front Roof and Porch Roof
line up at the bottom
page 21
Rear Roof
Advertisement
