Advertisement
Instructions for kit #B 1925
□
6 D. (2) Flex the housebody side-to-side as necessary to make it line up
with the edges of the Front (hold a block on the edges to confirm a good fit).
Tape the Front to the Sides.
(3) Stand the housebody upright. Tape across the top of the Front around the back
edge of the floor and back thru the window and door openings.
Line up and tape along both sides
□
6 E. At the back of the housebody, Tape the Base Floor up to hold it tight
to the top of the groove. Inspect the Base Floor to confirm it is at the top of the
groove all the way around.
□
6 F. Tape all the way around the housebody at the Mid Floor to pull the
joints tight. On this model I stretched 3 bands all the way around, stretching the
tape each time I went around a corner.
Tight
Tape all the way around the back
Let the glue dry
Housebody
Chimney Caps help see
when the side is lined up
Base Floor is at the
top of the groove
Clean up the
glue squeezings
Tape all the way around the house-
body to hold the parts tight
Tape
page 13
Advertisement
