Differential Carrier <Evolution-Iv, Evolution-V Gsr; Differential Carrier - Mitsubishi LANCER EVOLUTION-IV 1998 Workshop Manual

REAR AXLE

DIFFERENTIAL CARRIER

<EVOLUTION-IV, EVOLUTION-V GSR>
REMOVAL AND INSTALLATION
<Vehicles with AYC>
Pre-removal Operation
(1) Hydraulic Piping Fluid Draining
(2) Gear Oil Draining (Refer to P.27-28.)
(3) Lower Arm Assembly Removal
(Refer to GROUP 34.)
(4) Rear Stabilizer Removal (Refer to GROUP 34.)
(5) Drive Shaft Removal (Refer to P.27-36.)
6
7
3
108 – 127 {11.0 – 13.0}
9
88 {9.0}
2
29 – 34
{3.0 – 3.5}
Removal steps
1. Hydraulic unit hose assembly con-
nection
"BA 2. Propeller shaft connection
3. Differential support member mount-
ing bolt
AA" "AA 4. Rear crossmember and differential
carrier assembly
–
Differential Carrier <EVOLUTION-IV, EVOLUTION-V GSR>
5
1
34 {3.5}
3
11
9
88 {9.0}
Post-installation Operation
(1) Drive Shaft Installation (Refer to P.27-36.)
(2) Rear Stabilizer Installation (Refer to GROUP 34.)
(3) Lower Arm Assembly Installation
(Refer to GROUP 35.)
(4) Gear Oil Filling (Refer to P.27-28.)
(5) Hydraulic Piping Fluid Filling and Bleeding
(Refer to P.27-29.)
12 {1.2}
88 {9.0}
10
88 {9.0}
88 {9.0}
5. Differential support member
6. Upper stopper
7. Lower stopper
8. Differential support arm
9. Differential mount bracket
10. Differential mount bracket
11. Differential carrier
27-39
8
44 {4.5}
4
Unit: Nm {kgf@m}