Mitsubishi LANCER EVOLUTION-IV 1998 Workshop Manual page 340

22B-30
MANUAL TRANSMISSION OVERHAUL –
Synchronizer spring
Installation
direction
1st-2nd speed
synchronizer
hub
MD998364
Identification groove
Installation
direction
Synchronizer sleeve projections
Synchronizer hub deep grooves
"DA SYNCHRONIZER SPRING INSTALLATION
"EA 1ST-2ND SPEED SYNCHRONIZER HUB
Install the 1st-2nd speed synchronizer hub in such a way
that it will be oriented in the direction shown.
Caution
MD998812
When the hub is installed, make sure that the synchronizer
ring is not caught.
MD998814
MD998824
"FA SYNCHRONIZER SLEEVE INSTALLATION
(1) Install the synchronizer sleeve in such a way that it will
(2) When the synchronizer sleeve is installed, make sure
INSTALLATION
be oriented in the direction shown.
that the deep groove portion of the synchronizer hub
is aligned with the projecting portion of the sleeve.
Output Shaft