Lower Arm <Evolution-Iv - Mitsubishi LANCER EVOLUTION-IV 1998 Workshop Manual

FRONT SUSPENSION –
LOWER ARM <EVOLUTION-IV>
REMOVAL AND INSTALLATION
Post-installation Operation
(1) Push the Dust Cover of the Lower Arm and Stabilizer
Link Ball Joint with a Finger to Check for Possible
Cracks or Damage.
(2) Wheel Alignment Check and Adjustment
39 {4.0}
1
106 {10.8}*
6
Removal steps
1. Stabilizer link mounting nut
AA"
2. Lower arm to knuckle coupling bolt
3. Bolt
4. Stabilizer bracket
"AA 5. Bushing assembly
6. Lower arm assembly
2
3
4
Lower Arm <EVOLUTION-IV>
113 {11.5}
Molybdenum disulfide-base chassis
grease:
SHOWA SHELL SEKIYU SUNLITE
MB2, NISSEKI CLAKNOCK FL, or
equivalent
5
137 {14.0}
88 {9.0}
Caution
The part marked with * should be first temporarily
tightened, then torqued to specification with the
vehicle on the ground in unloaded condition.
NOTE
Follow the conventional procedures for removal service
points.
6
Unit: Nm {kgf@m}
33A-5