OSEE LCM215-E Series User Manual page 20

Locations and Function of Parts and Control
follows:
Power Switch
1.
Press this part to switch on or switch off the power.
Push the button to the "-" icon to switch on the power.
Push the button to the "" icon to switch off the power.
Power Input
2.
Plug the power supply to this interface to provide power to the device.
The specification is 12V5ADC.
SDI1 IN, SDI2 IN(BNC)
3.
Two SDI signal input interfaces, support multiple format HD/3G-SDI inputs.
SDI1 OUT, SDI2 OUT(BNC)
4.
Two SDI signal output interfaces.
HDMI IN(HDMI)
5.
One HDMI signal input interface, HDMI Type-A connector, support HDMI or DVI
signal.
Ethernet(RJ-45)
6.
A 10/100M Ethernet interface. Provide connection to a computer for external
control.
GPI interface(RJ-45)
7.
Reserved and not defined.
RS485 (RJ-45)
8.
Reserved and not defined.
Line IN(Unbalanced signal RCA connector)
9.
Two pairs of analog audio stereo input interfaces: AUDIO IN1 L, AUDIO IN1 R,
AUDIO IN2 L, AUDIO IN2 R.
Connect to the audio outputs of external device.
L OUT, R OUT(RCA)Audio Output
10.
Two audio output interfaces: AUDIO OUTPUT L, AUDIO OUTPUT R.
Output the analog stereo signal. The output audio can be changed in AUDIO
settings.
Headphone Output Connector (3.5mm stereo Jack)
11.
ON OFF
14