Appendix; Troubleshooting - Cal Flame G3 Owner's Manual

Appendix

Troubleshooting

Problem: Smell of gas is present
Solution: Check for loose connections in the gas line. Perform
a leak test following the procedure described in this
manual.
Problem: Burner does not ignite
Solution: Use the following procedure with the figure below.
Check the position of the sparker tip. It should be
pointing forward towards the front of the burner.
•
•
•
•
•
Note:
troubleshooting.
2009 G3, G4, G5 Grills
LTR20091050, Rev. A
Make sure there is a blue spark at the electrode tip
to the burner.
Make sure the igniter wire is connected firmly to the
valve ignition device and the electrode.
Make sure the valve orifice is free of any debris, dust
or grease.
Make sure the valve orifice is aligned inside the front
hole of the burner.
If there is no spark at all, replace the electrode or
igniter wire.
Turn off the gas at the source
17
while
www.calspas.com