Cal Flame G3 Owner's Manual page 20

18
Problem:
Solution:
Problem:
Solution:
Problem:
Solution:
www.calspas.com
Plugged orifice
Unplug the orifice as follows:
• Remove cooking grills, flame tamer and grease
tray.
• Remove burners from the bottom of the firebox by
pulling the cotter pin from beneath the burner peg
using a standard screwdriver or needle nose pliers.
• Carefully lift each burner up and away from the gas
orifice.
• Remove the orifice from the control valve.
• Gently clear any obstruction with a fine wire.
• Reinstall the orifice, reinstall the burners over the
orifices, and seat each burner peg into position hole
at the bottom ledge of the firebox.
• Replace all cotter pins.
• Replace cooking components and grease collectors.
If an obstruction is suspected in the control valve,
contact your local Cal Flame dealer for assistance.
Burner tube is misaligned over the orifice
Reposition the burner tube so that it is properly seated
over the orifice.
Obstruction in the gas line
Remove the fuel line from grill. (Do not smoke or
perform any maintenance in the vicinity of an open
flame.) Open the gas valve for one second to blow out
any debris. Close off the gas valve and reconnect the
fuel line securely.
2009 G3, G4, G5 Grills
LTR20091050, Rev. A