Printer Driver Cannot Be Installed (Windows 2000); Printer Driver Is Already Installed (Windows 2000) - Epson TM-C3400BK Technical Reference Manual

Printer Driver cannot be Installed (Windows 2000)

If the printer cannot be installed when running the install package under the Windows 2000
environment, the printer may be registered as an [Unknown device].
Follow the steps below to delete the [Unknown device], and run the install package.
1
Open the properties screen of [My Computer], and select the 
[Hardware] tab.
2
Click the [Device Manager] button to run the Device manager.
3
Delete the [Unknown device] under [Other devices].
4
Click the [OK] button of [Device Manager].
5
Turns off the printer.
6
Run an install package.
(For the procedure for running an install package, refer to "TM-C3400BK Install Assistant
User's Manual".)

Printer Driver is Already Installed (Windows 2000)

When the printer driver is already installed in the Windows 2000 environment, the settings of the
current printer driver may be changed if the version of the printer driver differs from that of the
printer driver of the install package. (Not affected for printer drivers of other than the TM-C3400BK.)
When keeping the current settings, save them in advance, and after executing the install package,
restore the settings back to the previous ones in the following manners.
❏ Create an install package under the current environment, and execute it after the installation.
(Refer to "TM-C3400BK Install Assistant User's Manual".)
❏ Create a BSF file for the existing environment, and import the BSF file into the existing printer
driver after installation.
212