Appendix; Introduction Of Network Software; Epson Device Admin; Epsonnet Config - Epson SureColor SC-P5300 Administrator's Manual

Table of Contents

Administrator's Guide

Appendix

The following describes the software that configures and manages devices.

Epson Device Admin is a multifunctional application software that manages the device on the network.

The following functions are available.

❏ Monitor or manage up to 2,000 printers or scanners over the segment

❏ Make a detailed report, such as for the consumable or product status

❏ Update the firmware of the product

❏ Introduce the device to the network

❏ Apply the unified settings to multiple devices.

You can download Epson Device Admin from Epson support website. For more information, see the

documentation or help of Epson Device Admin.

Running Epson Device Admin (Windows only)

Select All Programs > EPSON > Epson Device Admin > Epson Device Admin.

Note:

If the firewall alert appears, allow access for Epson Device Admin.

EpsonNet Config is an application software that can make settings to the device on the network. When the devices

are connected to the network via Ethernet, you can make settings, such as setting the IP address, changing the

connection method and so on even for devices not assigned to the IP address. This also can be used to make

network settings to the devices without the control panel.

Table of Contents