SRAM RockShox Super Deluxe Flight Attendant User Manual page 37

8
Optional Service: Remove the o-rings from the Pedal Sensor
assembly and seal tube, and discard them.
Clean the o-ring grooves with a damp shop towel.
10
Install the Pedal Sensor assembly into the seal tube, align the tabs, and press both pieces together until the tube snaps into place.
Install the expander wedge/bolt assembly.
Remove/Loosen
Adjust
11
12
Install
9
Apply grease to new o-rings and install them onto the Pedal Sensor
assembly and seal tube.
Consult the RockShox Spare Parts Catalog at
for available spare part kits.
Thread the bolt finger tight.
www.sram.com/service
13
Grease
37