Pedal Sensor - Battery And Service; Non-Threaded Pedal Sensor - Removal; Threaded Pedal Sensor - Removal - SRAM RockShox Super Deluxe Flight Attendant User Manual

Pedal Sensor - Battery and Service

To avoid permanent damage to the Pedal Sensor caused by battery corrosion, ONLY use AAA Lithium/Iron Disulfide (Li/FeS
non-rechargeable batteries.
Do NOT use rechargeable Lithium (Li-ion), alkaline, or nickel metal hydride (Ni-MH) batteries in the Pedal Sensor.

Non-Threaded Pedal Sensor - Removal

1
4
2
Loosen the Pedal Sensor bolt (drive side) while pushing the Pedal
Sensor assembly into the crank spindle. When the expander wedge
is loose enough, push the Pedal Sensor assembly out of the
non-drive side crank spindle with the hex wrench.

Threaded Pedal Sensor - Removal

Loosen the Pedal Sensor expander wedge bolt (drive side).
2
5
Threaded Seal Tube: Loosen the crank arm pinch bolts.
NOTI C E
Only loosen the pinch bolts; do not remove.
Remove/Loosen
N OTI CE
Only loosen the expander wedge bolt enough to dislodge the
wedge; do not remove the bolt.
1
4
Only loosen the expander wedge bolt enough to dislodge the
wedge; do not remove the bolt.
Unthread the Pedal Sensor from the non-drive side crank arm and
spindle.
Remove the Pedal Sensor from the crank spindle.
Adjust
3
N OTI CE
N OTI CE
3
4
)
2
35