SRAM RockShox Super Deluxe Flight Attendant User Manual page 18

If installed (optional): Press and hold the AXS button on the AXS
Controller until the LED blinks quickly, then release.
Successful pairing can be verified with the SRAM AXS app. All paired
components will be listed below the Flight Attendant Control Module.
If any Flight Attendant component does not respond, repeat the
pairing process.
Press & hold
4
Press & release
Press and release the AXS button on the Flight Attendant Control
Module to end the pairing session, or wait 30 seconds for the
session to time out. The AXS LED will stop blinking.
The pairing process does not need to be repeated when any battery
is removed and/or replaced.
The pairing process must be repeated if any components are
replaced, added, or removed.
5
18