Table of Contents
Advertisement
Instruments and indicators
10-minute display will begin blinking.
5.
Push the "
desired 10-minute value is displayed.
6.
Push the "
" (set) button again. The 1-
minute display will begin blinking.
7.
Push the "
desired 1-minute value is displayed.
8.
Push the "
" (set) button again to start
the clock.
YAMAHA
SPEED
TRIP
TIME
set
The clock operates on battery power. Dis-
connecting the battery will stop the clock.
Reset the clock after connecting the battery.
EMU36080
Voltmeter
The voltmeter displays the charge of the bat-
tery in volts(V).
EMU26721
Fuel level-alert indicator
If the fuel level decreases to one segment,
the fuel level alert segment will blink.
Do not continue to operate the engine with
full throttle if an alert device has activated.
Get back to the port within trolling engine
speed. NOTICE: Running out of fuel can
damage the engine.
34
" (mode) button until the
" (mode) button until the
km/h
knot
mph
km
mile
BATT
mode
ZMU07004
[ECM01770]
YAMAHA
SPEED
TRIP
TIME
set
1. Fuel level-alert segment
EMU26732
Low battery voltage-alert indicator
If battery voltage drops, the display will auto-
matically turn on and blink.
Get back to the port soon if an alert device
has activated. For charging the battery, con-
sult your Yamaha dealer.
YAMAHA
1
SPEED
TRIP
TIME
set
1. Low battery indicator
EMU26741
Fuel management meter
The fuel management meter shows the state
of the fuel consumption while the engine is
running.
km/h
knot
mph
1
km
mile
BATT
mode
ZMU07005
km/h
knot
mph
km
mile
BATT
mode
ZMU07006
Advertisement
Table of Contents
