Yamaha VF200 Owner's Manual page 99

1
1. Water separator-alert indicator
1. Stop the engine.
2. Remove the top cowling.
3. Remove the bolts, and then remove the
fuel filter cover.
1. Bolt
2. Fuel filter cover
4. Disconnect the water detection switch
coupler. NOTICE: Be careful not to get
any water on the water detection
switch coupler, otherwise a malfunc-
tion could occur.
1
ZMU06963
1
2
1
ZMU07519
[ECM01950]
Trouble Recovery
1. Water detection switch coupler
5. Remove the filter cup from the filter
housing, and then remove the O-ring
from the filter cup. NOTICE: Be careful
not to twist the water detection
switch lead when unscrewing the fil-
ter cup.
[ECM01960]
1
2
3
4
1. Filter housing
2. O-ring
3. Filter cup
4. Water detection switch lead
6. Drain the water in the filter cup by soak-
ing it up with a rag.
7. Put the O-ring on the filter cup in its orig-
inal position, and then install the filter cup
onto the filter housing. NOTICE: Be
careful not to twist the water detec-
tion switch lead when screwing the fil-
ter cup onto the filter housing.
1
ZMU07520
ZMU07521
[ECM01970]
93