Table of Contents
Advertisement
intake air leak or carburetion problem in that
cylinder. Do not attempt to diagnose any
problems yourself. Instead, take the out-
board motor to a Yamaha dealer. You should
periodically remove and check the spark
plug because heat and deposits will cause
the spark plug to slowly break down and
erode.
To remove the spark plug
1.
Remove the flywheel magnet cover.
1
1. Flywheel magnet cover
2.
Remove the ECM (Electronic Control
Module) cover.
1
1. ECM (Electronic Control Module) cover
3.
Remove the bolt that is securing the ig-
nition coil, and then remove the ignition
coil. NOTICE: Do not use any tools to
remove or install the ignition coil.
Otherwise, the ignition coil coupler
could be damaged.
1
2
1
2
1
2
1. Bolt
2. Ignition coil
4.
Remove the spark plug. WARNING!
When removing or installing a spark
plug, be careful not to damage the in-
sulator. A damaged insulator could
allow external sparks, which could
lead to explosion or fire.
ZMU06971
To check the spark plug
1.
Check the condition of the spark plug. If
electrode erosion becomes excessive or
carbon and other deposits are exces-
ZMU06947
sive, replace the spark plug with the
specified plug.
Standard spark plug:
LFR6A-11
2.
Measure the spark plug gap using a
thickness gauge. If the spark plug gap is
Maintenance
[ECM02330]
1
2
1
2
1
2
ZMU06973
[EWM00561]
ZMU06948
75
Advertisement
Table of Contents
