Table of Contents
Advertisement
Predator Installation Manual V10_1_29_00
Set Time
The Datemme page, offers options to:-
•
Set Manually - Input time/date manually.
•
Synchronize with Computer Time - Put a tick in the button and then click OK, to apply the local
computer date/time to the camera.
•
Synchronize with NTP Server - Put a tick in the button and then click OK, to apply the local server
date/time to the camera.
•
NTP Server - Input the address of the time server required, default is pool.ntp.org.
Timezone
•
Time Zone - Select time zone to suit the location of the camera/system.
23 Network
+
•
!;'.
360 Vi�ion T�hnology Limhll
)C
CD
Camera - Cannot be edited, shows label/name given to
the camera.
Network
The Network tab, offers options to:-
DHCP Enable -Allows the camera to be set using a dynamic IP address.
IP Address - Input a static IP address, if DHCP is not used.
Netmask - Input the Network Subnet Mask.
Default Gateway - Input the Network Gateway.
•
Primary Name Server - Input the Domain name server, if required.
•
MTU Size -Option to change the MTU size, default is 1500 bytes.
•
MAC Address - Displays the camera MAC address.
•
Default Recovery - Inhibit Multiple Power Cycle Method, disables the Network recovery process
(See Network Settings Recovery - page 50 )
NTP
NTP Server - Input the address of the time server required, default is pool.ntp.org.
OK to program the new settings into the Predator.
Cancel to abandon the changes to the settings.
II
192.168. 1 .1 57
/k>gon.html•
(See Video - Camera - page 36)
© 360 Vision Technology Ltd
" " \'Ill U
Q.
Search
l!l
Page 44 of 56
-
0
X
II\ ID
-
Advertisement
Table of Contents
Need help?
Do you have a question about the Predator Ultra and is the answer not in the manual?
Questions and answers