Locating The Predator Ultra On Your Network; Connecting To The Predator Ultra - 360 Vision Predator ULTRA Installation & Configuration Manual

Hide thumbs Also See for Predator ULTRA:
Table of Contents

Advertisement

Predator ULTRA Installation Manual V2.1.25.3
Predator ULTRA Configuration

7 Locating the Predator ULTRA on your Network

Using the DVR management software, 'ONVIF Device Manager' or 360 Vision Discovery Tool (which can be
found on the CD supplied or from 360 Vision Technology web site/technical support) to find the IP address of
the Predator ULTRA. Note the ports used by the Predator ULTRA are:-

8 Connecting to the Predator ULTRA

Type in the IP address of the Predator ULTRA into the address bar of Internet browser and install the plug-ins
as required. The web page of the camera will then appear.
Predator ULTRA Web Page Login screen
Default IP Address
Subnet
Gateway
Protocol
ONVIF/HTTP
RTP Stream 1 (Unicast)
RTCP Stream 1 (Unicast)
RTP Stream 2 (Unicast)
RTCP Stream 2 (Unicast)
RTSP
360 SDK
360 Event
Enter the User Name (default is admin)
Enter the Password (default is 9999)
© 360 Vision Technology Ltd.
192.168.1.187
255.255.255.0
192.168.1.4
Port
80 TCP
6970 TCP/UDP
6971 TCP/UDP
6972 TCP/UDP
6973 TCP/UDP
554/8554 TCP
3600 TCP
9001 TCP
Page 21

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Predator ULTRA and is the answer not in the manual?

Table of Contents