Color Adjust (Video,S-Video,Component) - Eiki EK-110U Owner's Manual

Color adjust (Video,S-video,Component)

1 Press MENU button on the remote control or
top control to display screen menu. Press
 button to select "Color adjust", then
press the OK button.
2 Press button to select the item you want
to set, press the OK button.
3 Press button to adjust the data.
Contrast
Press  to decrease the contrast and  to
increase it.
Brightness
Press  to decrease the brightness and  to
increase it.
Color
Press  to decrease the chroma and  to
increase it.
Tint
Press  to select the appropriate tone for the
image.
Red (White balance)
Press  to lighten the red tone and  to deepen
it.
Green (White balance)
Press  to lighten the green tone and  to
deepen it.
Blue (White balance)
Press  to lighten the blue tone and  to deepen
it.
Sharpness
Press  to decrease the sharpness of an image
and  to increase it.
√ Note:
- Signal input "Video", "S-video" or "Component",
"Tint" is in grey, it is disable.
- If you only adjust projector to "Video", "S-video"
or "Component" , "Sharpness" is disable.
Color adjust
Color adjust (Video,S-video, Component)
Color adjust
Image mode
Contrast
Brightness
Color
Tint
Red
Green
Blue
Sharpness
Standard
32
32
32
32
32
32
32
8
37