Setting; On Start; Standby Mode - Eiki EK-110U Owner's Manual

The projector has "Setting" menu that allows you to set the other various functions described as
follows.
1 Press MENU button on the remote control or
top control to display screen menu. Press
 button to select "Setting", then press
the OK button.
2 Press button to select the item you
want to set, press the OK button.
3 Press button to adjust the item, then
press the OK button.

On start

Enable the projector to be turned on
automatically just by connecting the AC
power cord to an outlet when this function
is set to On.
On
Start the projection immediately, enter
countdown display.
Off
Start up in the standby mode.

Standby mode

This function is available when operating the
projector via network.
Press button to select the item below:
ECO. –
Choose "Eco" to save power consumption
Normal–
Choose "Normal" to return to normal standby
Note: For control functions on standby mode, see below table
Control
Model
Standby mode
Power ON
Operation Status Check
O: Active X: Not Active
* The projector can start up by "Wake on LAN" tool in Normal Standby mode.
The software and its manual can be downloaded from EIKI global website (for EK-110U only)
URL: https://global.eiki.com
38
RS232C
EK-100W EK-110U
EK-101X
EK-102X
ECO. Normal ECO.
O O O
X O X

Setting

Setting menu
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal
Sound
HDMI Setup
On start
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal
Sound
HDMI Setup
Standby mode
Setting
On start
Standby mode
High land
Lamp control
Cooling fast
Closed caption
Key lock
Iris
Terminal
Sound
HDMI Setup
EK-100W
EK-101X
EK-102X
Normal ECO. Normal
O X
X X
Normal
Computer 2
Normal
Computer 2
Eco
Normal
Computer 2
LAN
EK-110U
*with "Wake on LAN" tool
ECO. Normal
O X O
O X X
Off
Eco
Off
Off
On
Off
Eco
Off
Off
On
Off
Off
Off
On