Security - Eiki EK-110U Owner's Manual

Security

This function allows you to use the PIN code
lock and PIN code change functions to set the
security for the projector operation.
PIN code lock
This function prevents the projector from
being operated by unauthorized persons
and provides the following setting options for
security.
Off .... Unlocked.
On .... Enter the PIN code every time
turning on the projector.If you
want to change PIN code lock
setting or PIN code,you must
enter the PIN code. The default
PIN code is "111".
If you want to change the PIN code lock setting, press the OK button, then PIN code dialog box
appears.
Press ◄► button to select a number, and then press the OK button to enter this number, the
cursor automatically move to next box. If you fixed an incorrect number, press MENU button to
reset it again.
Repeat this step to complete entering a three-digit number.
After entering the three-digit number, the cursor automatically move to "Set", and press the OK
button, then you can change the PIN code lock setting.
If you entered an incorrect PIN code,the number (***) turn red, it will be reset automatically within
one second. Enter the correct PIN code all over again.
PIN code change
The PIN code can be changed to three-digit number. Press  button to select PIN code change.
Pin code dialog box appears, Press ◄► button to enter the correct code. The New PIN code input
dialog box appears. Set a new PIN code.
 Note:
● Keysotne-Curved correction and Logo - Capture and User function does not support EK-110U.
CAUTION:
WHEN YOU HAVE CHANGED THE LOGO PIN CODE, WRITE DOWN THE NEW PIN CODE
IN COLUMN OF THE LOGO PIN CODE NO. MEMO ON PAGE 81, AND KEEP IT SECURELY.
SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE LOGO PIN CODE SETTING
CAN NO LONGER BE CHANGED.
Expand
Security
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter
47