Operation; Opening The Control Unit - Viessmann Vitotronic 200 Operating Instructions For The System User

Controls
You can change all heat pump control
unit settings centrally at the program-
ming unit.
If remote control units are installed in
your rooms, you can also adjust the set-
tings at the remote control units.
Remote control operating instruc-
tions

Opening the control unit

The heat pump control unit may look dif-
ferent depending on the type of heat
pump.
Control unit in the front of the heat pump
D C
A ON/OFF switch
B Programming unit
Flow temperature 40℃
Heating/cooling
DHW
i
Solar energy
Information
Select with
Note
The programming unit can be placed in
a wall mounting base. This is available
as an accessory. Ask your heating con-
tractor for more information.
B
C ON indicator (green)
D Fault indicator (red)

Operation

A
11