Viessmann Vitotronic 200 Operating Instructions For The System User page 26

Central heating/cooling
Setting the room temperature
4. "Set red. room temp"
5. Set the required value.
Setting the operating program
Factory setting: "Heating and DHW" or
"Heating/cooling and DHW"
Standard menu
1. "Heating" or "Heating/cooling"
2. Where appropriate, select the heat-
ing/cooling circuit.
3. "Heating program"
4. "Heating and DHW"
or
"Heating/cooling and DHW"
For the separate cooling circuit:
Extended menu
1.
2. "Heating/cooling"
Setting a time program
Note
A time program cannot be set for a sep-
arate cooling circuit.
26
(cont.)
Central heating with this temperature:
■ Active in the time program in operating
status "Reduced" (see page 28).
■ In the holiday program (see
page 32).
3. "Cooling circuit SKK"
4. "Heating program"
5. "Cooling"
■ The rooms of the selected heating/
cooling circuit are heated or cooled in
accordance with the parameters for
the room temperature and time pro-
gram.
■ A separate cooling circuit is constantly
cooled.
■ DHW is heated in accordance with the
parameters for the DHW temperature
and time program.
■ The time program for central heating/
cooling is made up of time phases.
Set an operating status for each time
phase ("Reduced", "Standard",
"Fixed value"; see page 28).
Factory setting:
One time phase from 0:00 to 24:00 h
for every day of the week with operat-
ing status "Standard".