Displaying Vlan Ids Associated With A Port - Cabletron Systems DLE52-MA User Manual

Chapter 3: VLAN Configuration
Filter Using VLAN Lists (Toggle)
Used to filter out (drop) frames that are classified, via their VLAN tag, as
belonging to a VLAN that is not on the Port VLAN List and prevent them
from being forwarded by the switch. This field toggles between YES and
NO. YES enables filtering according to the Port VLAN List. NO allows
the switch to forward the frames. The default is NO.
Filter All Untagged Frames (Toggle)
Used to filter out all incoming untagged frames so they will not be
forwarded by the switch. This field toggles between YES and NO. YES
enables the filtering of untagged frames. NO allows the switch to forward
untagged frames. The default is NO.
3.6.1

Displaying VLAN IDs Associated with a Port

To display the VLAN IDs and VLAN Names of the VLANs associated
with a particular port, proceed as follows:
1. Use the arrow keys to highlight the Port field.
2. Use the SPACE bar or BACKSPACE key to step through the available
port selections. The screen displays the Port VLAN List of the selected
Port. If ALL is selected, no VLAN ID or VLAN Name information is
displayed under Port VLAN List.
3. To display additional VLANs that do not display in the current screen
display, use the NEXT or PREVIOUS commands located at the
bottom of the screen, as follows:
The NEXT and PREVIOUS fields will only display if there are
NOTE
further VLANs in the list to page through.
4. To display the next screen, use the arrow keys to highlight NEXT.
Press ENTER to view the entries on the next screen.
5. To display the previous screen, use the arrow keys to highlight
PREVIOUS. Press ENTER to view the entries on the previous screen.
3-20 802.1Q VLAN User's Guide