Table of Contents
Advertisement
Chapter 3: VLAN Configuration
To access the 802.1Q VLAN Configuration Menu screen from the
module, device, or chassis specific Configuration Menu screen, use the
arrow keys to highlight the 802.1Q VLAN CONFIGURATION MENU
item and press ENTER. The 802.1Q VLAN Configuration Menu screen,
Figure 3-4, displays.
Module Type: xxxxx-xx
Slot Number: xx
Figure 3-4 802.1Q VLAN Configuration Menu Screen
The following describes each menu item on the 802.1Q VLAN
Configuration Menu screen:
DEVICE/VLAN CONFIGURATION
The Device/VLAN Configuration screen enables the user to view, add,
name, enable, or disable VLANs within the device, and also associate the
VLANs to a Filter Database ID (FID). It also enables the user to configure
attributes that apply to the entire switch and/or VLANs. Refer to
Section 3.4 for additional information.
3-6
MS 700 LOCAL MANAGEMENT
802.1Q VLAN Configuration Menu
DEVICE/VLAN CONFIGURATION
PORT ASSIGNMENT CONFIGURATION
PORT FILTERING CONFIGURATION
VLAN FORWARDING CONFIGURATION
EXIT
Firmware Revision:
XX.XX.XX
BOOTPROM Revision: XX.XX.XX
RETURN
802.1Q VLAN User's Guide
2664-04
Advertisement
Table of Contents
