Cabletron Systems DLE52-MA User Manual page 43

Module Type: xxxxx-xx
Slot Number: xx
Port: [002]
SAVE
Figure 3-7 Port Filtering Configuration Screen
The following defines each field of the Port Filtering Configuration
screen:
VLAN ID (Read-Only)
Displays the VLAN ID of the VLANs that are configured to have their
frames transmitted out the port selected in the Port # field.
VLAN Name (Read-Only)
Lists the names of the VLANs associated with the VLAN ID. If a VLAN
does not have a name, "Not Defined" is displayed.
Port # (Selectable)
Used to step to the port number of the interface being configured
including the selection of ALL ports.
802.1Q VLAN User's Guide
Port Filtering Configuration Screen
MS 700 LOCAL MANAGEMENT
Port Filtering Configuration
Port VLAN List
VLAN ID
0001
0003
0004
0012
0014
0020
Filter Using VLAN Lists: [NO]
Filter All Untagged Frames: [NO]
PREVIOUS
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
VLAN Name
Default VLAN
Not Defined
Not Defined
Not Defined
Not Defined
Not Defined
NEXT EXIT
XX.XX.XX
RETURN
2664-07
3-19