Table of Contents
Advertisement
For the purposes of this walkthrough, port 10 will be configured
NOTE
as the trunk port.
13. Use the arrow keys to highlight the Port Mode field for port 10. Use
the SPACE bar or BACKSPACE key to step sequentially through the
possible settings of the port until 1Q TRUNK is displayed.
14. Use the arrow keys to highlight the SAVE command at the bottom of
the screen. Press ENTER. Port 10 is now acting as a 1Q Trunk port and
every VLAN is in its Port VLAN List. The frame format for every
VLAN is also set to tagged. The screen should now look like
Figure 3-11.
Module Type: xxxxx-xx
Slot Number: xx
Port
1
2
3
4
5
6
7
8
9
10
11
12
SAVE
Now that the TEST VLAN and the 1Q Trunk connection are set up,
we can proceed to activate the TEST VLAN.
15. On the 802.1Q VLAN Main Menu screen, use the arrow keys to
highlight the DEVICE/VLAN CONFIGURATION menu item.
802.1Q VLAN User's Guide
MS 700 LOCAL MANAGEMENT
Port Assignment Configuration
VLAN ID
Port Mode
[0001]
[HYBRID]
[HYBRID]
[0001]
[HYBRID]
[0002]
[0001]
[HYBRID]
[HYBRID]
[0001]
[0001]
[HYBRID]
[0001]
[HYBRID]
[HYBRID]
[0001]
[0001]
[HYBRID]
[1Q TRUNK]
[0001]
[0001]
[HYBRID]
[0001]
[HYBRID]
PREVIOUS
Figure 3-11 Walkthrough Stage Three
Quick VLAN Walkthrough
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
VLAN Name
DEFAULT VLAN
DEFAULT VLAN
TEST VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
DEFAULT VLAN
NEXT
EXIT
XX.XX.XX
RETURN
2664-11
3-29
Advertisement
Table of Contents
