Paging Through The Port List; Port Filtering Configuration Screen - Cabletron Systems DLE52-MA User Manual

Chapter 3: VLAN Configuration
3.5.3

Paging Through the Port List

To display additional ports that do not display in the current screen, use
the NEXT or PREVIOUS commands at the bottom of the screen, as
follows:
The NEXT and PREVIOUS fields will only display if there are
NOTE
further Port List entries to page through.
1. To display the next screen, use the arrow keys to highlight NEXT.
Press ENTER to view the entries on the next screen.
2. To display the previous screen, use the arrow keys to highlight
PREVIOUS. Press ENTER to view the entries on the previous screen.
3.6

PORT FILTERING CONFIGURATION SCREEN

The Port Filtering Configuration screen has three functions:
• Enables the user to select a port and view a list of VLANs that are
configured to have their frames transmitted out that port.
• Enables the filtering out of certain incoming frames according to the
VLAN List and prevent them from being switched and transmitted out
another port.
• Enables the filtering out of all incoming untagged frames so they will
not be transmitted out another port.
To access the Port Filtering Configuration screen from the 802.1Q VLAN
Configuration Menu screen, use the arrow keys to highlight the PORT
FILTERING CONFIGURATION menu item and press ENTER. The
Port Filtering Configuration screen, Figure 3-7, displays.
3-18 802.1Q VLAN User's Guide