802.1Q Vlan Configuration Menu Screen - Cabletron Systems DLE52-MA User Manual

802.1Q VLAN Configuration Menu Screen
It may also be helpful to sketch out a diagram of your VLAN strategy.
The examples provided in Chapter 4 may be useful for a depiction of the
planning process.
Access Local Management as described in your device user's guide.
Perform all required initial setup operations. Navigate to the 802.1Q
VLAN Configuration Menu screen to begin the VLAN configuration
process for the device.
3.3

802.1Q VLAN CONFIGURATION MENU SCREEN

The 802.1Q VLAN Configuration Menu screen enables the user to select
screens to assign switched network ports to VLANs, define new VLANs,
and configure port filtering according to a VLAN list or untagged frames.
Network users can be logically grouped into VLANs even if they span
long physical distances over a vast, intricate physical network. The VLAN
Local Management menu items listed on the 802.1Q VLAN
Configuration Menu allow such VLANs to be configured on a network at
the switched port of the device or MultiSwitch 700 chassis.
Before attempting the VLAN configuration, ensure that the device to be
configured has been set for 802.1Q SWITCHING mode. The mode
selection is a Local Management operation that is accessible through the
General Configuration screen of the device.
The device resets when changing operational modes.
!
CAUTION
802.1Q VLAN User's Guide 3-5