Changing The Frame Format; Quick Vlan Walkthrough - Cabletron Systems DLE52-MA User Manual

802.1q vlan

Hide thumbs Also See for DLE52-MA:

Table of Contents

5. Press ENTER. The message "SAVED OK" displays.

The port is deleted from the VLAN Forwarding List of the selected

VLAN.

3.7.5

Changing the Frame Format

To change the frame format for a port, proceed as follows:

1. Use the arrow keys to highlight the Port field. Step through the

available ports by pressing the SPACE bar or BACKSPACE.

2. Using the arrow keys, select the Frame Type field. Use the SPACE

bar or BACKSPACE to toggle between Tagged or Untagged.

3. Use the arrow keys to highlight the SAVE command at the bottom of

the screen.

4. Press ENTER. The message "SAVED OK" displays.

3.8

The procedures below provide a short tutorial walkthrough that presents

each of the steps necessary to conﬁgure a new VLAN, assign a port to it,

and check the Port VLAN List of the port. You may wish to follow this

walkthrough from start to ﬁnish before attempting to conﬁgure your own

VLANs.

This walkthrough begins at the 802.1Q VLAN Conﬁguration Menu

screen for a DLM6C-AA chassis. Follow the instructions in your device

user's guide to navigate to this Local Management screen.

The screens displayed by your devices may be marginally

NOTE

different from those shown in the illustrations for this

walkthrough.

1. On the 802.1Q VLAN Conﬁguration Menu screen, use the arrow keys

to highlight the DEVICE/VLAN CONFIGURATION menu item.

Press ENTER. The Device/VLAN Configuration screen displays.

2. In this walkthrough, we will not change the setting of the Forward

Default VLAN Out All Ports fields from their default setting of NO.

802.1Q VLAN User's Guide

Quick VLAN Walkthrough

3-25

Table of Contents