Table of Contents
Advertisement
Chapter 3: VLAN Configuration
Press ENTER. The Device/VLAN Configuration screen, Figure 3-12,
displays.
Module Type: xxxxx-xx
Slot Number: xx
VLAN ID
1
2
VLAN ID: 1
SAVE
16. Use the arrow keys to highlight the Admin Status field of
VLAN ID 2, the TEST VLAN.
17. Press the SPACE bar to toggle the field to display Enabled.
18. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
19. Press ENTER. The message "SAVED OK" displays. The switch
activates the new VLAN.
3-30
MS 700 LOCAL MANAGEMENT
Device/VLAN Configuration
Forward Default VLAN Out All Ports: [NO]
FID
VLAN Name
1
DEFAULT VLAN
2
TEST VLAN
FID: 2
VLAN Name: DEFAULT VLAN
Figure 3-12 Walkthrough Stage Four
Firmware Revision:
XX.XX.XX
BOOTPROM Revision: XX.XX.XX
Admin Status
[Enabled]
[Enabled]
RETURN
EXIT
802.1Q VLAN User's Guide
[ADD]
2664-12
Advertisement
Table of Contents
